Most common
problems & fixes

Is your Electrolux 911 239 008 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

The dishwasher door is not closed properly.

The door might not be aligned or latched correctly.

Ensure the door is properly aligned and securely closed.

The dishes are still dirty after washing.

Incorrect wash program selected or dishes loaded improperly.

Select the appropriate wash program and ensure dishes are loaded correctly, without overcrowding.

Scale deposits on dishes.

The special salt container is empty or water softener is incorrectly adjusted.

Refill the special salt container and adjust the water softener settings.

The dishwasher does not fill with water.

The tap is blocked or furred with lime-scale.

Clean the tap and ensure it's fully open.

View all problems & fixes

Quick setup

Follow these easy steps to get your Electrolux 911 239 008 Dishwasher up and running in no time.

1

Check for Transport Damage

Inspect the dishwasher for any transport damage. Under no circumstance should a damaged appliance be connected. In case of any damage, contact your vendor.

2

Ensure Compatibility

Verify that the nominal voltage and type of current specified on the rating plate match those used at the installation site.

3

Remove Transport Clips

Prior to using the dishwasher for the first time, remove all clips securing the dish racks for transport.

View the rest of the steps

Eco-Friendly Wash

The Electrolux 911 239 008 dishwasher features a 'Pulse Wash' system that varies motor speed and spray pressure to enhance cleaning while being kind to the environment.

Integrated Design

This dishwasher can be seamlessly integrated into your kitchen or used as a stylish free-standing appliance, giving you flexibility in design.

Troubleshooting

The Electrolux 911 239 008 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Electrolux might be giving you.

END indicator flashing

No water is running into the dishwasher. Ensure the tap is fully open, check the filter in the threaded hose fitting at the water inlet valve for blockages, and verify correct installation of the water inlet hose.

DRYING indicator flashing

The siphon is blocked. Clean the siphon to ensure proper drainage.

END and DRYING indicators flashing simultaneously

The leak prevention system has been triggered. Check for any leaks. If the issue persists, contact customer service.

More Troubleshooting

Installation and Connection

The Electrolux 911 239 008 dishwasher can be installed as a built-in or free-standing appliance. When installing next to a gas or coal cooker, a heat-insulating, non-flammable plate must be mounted. If installed under a kitchen work surface, the original work surface of the dishwasher should be removed.

Operating Instructions

Before using the dishwasher for the first time, adjust the water softener and fill with special salt and rinse aid. Load cutlery and dishes appropriately, ensuring spray arms can rotate freely. Select a wash programme based on the type and degree of soiling.

Care and Maintenance

Regularly clean the filter to maintain efficiency. If issues arise, refer to troubleshooting instructions. If customer service is needed for problems listed in the manual, the service visit may not be free, even during the warranty period.

Safety Instructions

Always transport the dishwasher upright. Do not sit or stand on the open door as the appliance may tip over. Shut off the water supply at the tap when not in use for extended periods, such as during holidays. In case of a fault, shut off the water supply, switch off the appliance, and unplug it.

Economical and Ecological Dishwashing

Connect to hot water supply only if it is not electrically heated. Adjust the water softener correctly and avoid pre-rinsing dishes under running water. The load sensor optimizes water usage by calculating the necessary amount for the load size.

Technical Data

The dishwasher has a capacity of 12 place settings. Permitted water pressure ranges from 1-10 bar. Dimensions are 850 x 600 x 600 mm (H x W x D). Ensure electrical connection specifications match those on the rating plate inside the door.

Maintenance

Check out our tips to prevent many common issues and extend the life of your Electrolux Dishwasher.

Regular Cleaning and Maintenance

To prevent issues, regularly clean the dishwasher, especially the filters. Ensure that the filters are not clogged and are correctly positioned after cleaning. This helps in maintaining optimal performance and avoiding blockages.

Correct Loading of Dishes

Load dishes in a manner that does not obstruct the rotation of the spray arms. Ensure that large leftovers are removed and remnants of burnt food in pans are softened before loading. Overloading can prevent effective cleaning.

Use of Detergents and Rinse Aid

Always use the correct amount of detergent and ensure that rinse aid levels are maintained. If using '3 in 1' or combi detergent tablets, follow guidelines for optimal use. Adjust rinse aid dosing as necessary.

Water Softener Adjustment

Ensure the water softener is correctly adjusted to prevent scale deposits on dishes. Refill the special salt container as needed.

Leak Prevention

Ensure the leak prevention system, including the Aqua Control System, is functional to protect against water damage. Regularly check and maintain hoses and connections.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Technical Specifications

  • Capacity: 12 place settings including serving dishes
  • Permitted Water Pressure: 1-10 bar (10-100 N/cm2 = 0.1-1.0 MPa)
  • Electrical Connection: Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door on the right.
  • Weight: 54 Kg

Dimensions

  • Free-Standing Appliances: 850 x 600 x 600 (H x W x D in mm)
  • Built-In Dishwashers: 820 - 880 x 596 x 570 (H x W x D in mm)
  • Fully Integrated Dishwashers: 820 - 880 x 596 x 546 - 550 (H x W x D in mm)

Energy and Water Consumption

  • Energy: 1.35 - 1.55 kWh
  • Water: 18-20 litres

Electrolux 911 239 008 Built-In Dishwasher

The Electrolux 911 239 008 is a state-of-the-art built-in dishwasher designed to seamlessly integrate into your kitchen, delivering top-notch cleaning performance with every cycle. This premium appliance is engineered for efficiency and durability, ensuring that your dishes are spotless and hygienically cleaned. With advanced features such as the AQUA CONTROL SYSTEM, which prevents water leaks and overflow, and a variety of wash programs tailored to different needs, this dishwasher offers both reliability and versatility. Its sleek design complements any kitchen décor, while the noise-reduction technology ensures a quiet operation, making it an ideal choice for open-plan living spaces. Whether you're dealing with a full load of dishes or delicate glassware, the Electrolux 911 239 008 handles everything with precision and care, providing you with the peace of mind that your kitchen cleanup is in expert hands.